Nitek IPPWR16 Manuel d'utilisateur télécharger pdf

Model IPPWR16

16 Port Gb PoE+ Surge Protector

Installation and

Operation Manual

Rev 052912

NITEK®

Europe Office:

De Schans 19-21 2a, 8231 KA Lelystad

The Netherlands

Tel: +31(0)320-230005

Fax: +31(0)320-282186

E-mail: [email protected]

WWW.NITEK.NL

USA Office:

5410 Newport Drive, Rolling Meadows, IL 60008

Phone: (800) 529-8900

Fax: (847) 259-1300

E-mail: [email protected]

WWW.NITEK.NET

68-016-0103

Specifications

Enclosure Type 19” rack, 2RU Height

Connection Method Standard RJ45

(16 In - 16 Out)

Clamping Voltage 58v (on all lines)

Network Type 10/100/1000

PoE+ or non-PoE

Temperature -40°C to +85°C

Installation

The IPPWR16 must be properly installed to insure maximum protection. The function of the IPPWR16 is to

allow a surge to be routed to ground and to clamp the protected equipment video inputs to a minimum voltage.

There are three key points to remember when installing the IPPWR16. First, provide a low impedance

connection between the IPPWR16 and your protected equipment. This is best done by keeping the PROTECTED

Ethernet cable connections as short as possible, ideally less than 3 feet.

Second, the system should use a single ground point. Connect the grounding stud of the IPPWR16 to a single

ground point. A single ground point is a proper building ground to which equipment grounds are connected. Ideally,

the protected equipment should be isolated from ground. If the IPPWR16 and the protected equipment are both

grounded you will provide a parallel path to ground and a portion of the surge current can flow through that path.

Additionally, AC power line protectors should be used to complete your surge protection strategy.

Finally, the UNPROTECTED cables and wires should not be crossed with the PROTECTED cables and wires.

Crossing cables could provide a path for surge currents to bypass the IPPWR16 protection circuits.

Description

The IPPWR16 is designed to provide 16 channels of

surge protection for network devices. It can be used

with both PoE+ and non-PoE devices. The

IPPWR16 is cost-effective and ideally suited for

protecting multi-input devices such as a network

hub, NVR, or groups of IP cameras or servers. The

IPPWR16 is rack mountable in a standard 19” rack.

It installs in minutes and provides a single easy

access point for grounding.

Network runs can be up

to 100 meters

IPPWR16

POE Switch

Up to 15.4 watts

1 2

Résumé du contenu

Page 1 - Model IPPWR16

Model IPPWR16 16 Port Gb PoE+ Surge Protector Installation and Operation Manual Rev 052912 NITEK® Europe Office: De Schans 19-21 2a, 8231 KA Lelystad

Page 2 - PoE Switch

Network runs can be up to 100 meters IPPWR16 POE Switch Up to 15.4 watts IPPWR16 PoE Switch

Commentaires sur ces manuels

Pas de commentaire

Nitek IPPWR16 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Nitek IPPWR16. Nitek IPPWR16 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Nitek IPPWR16